Which 7.3L this IDM repair covers
A Navistar 7.3 IDM repair rebuilds the injector driver module you send in, and the module that goes back on your truck is the one that came off it.
This page covers the injector driver module fitted to the International and Navistar 7.3L V8. Navistar produced that engine as the T444E between 1994 and 2003, for its own medium duty trucks and for bus chassis.
Ford took the same engine design for pickups and vans and badged it the 7.3L Power Stroke. Published accounts describe the two engines as essentially identical mechanically, with the control calibration as the main difference. The Ford injector driver module is catalogued on its own page and sold by year and body style rather than by part number, so an F-Series or E-Series owner belongs on the Ford 7.3L Power Stroke IDM page instead.
The three part numbers on this repair page
Diesel ECM Exchange services three International Navistar 7.3L IDM part numbers. The number is stamped on the module itself, and it is what you match against the selector:
- 1807248C1
- 1807313C1
- 1807313C2
The selector carries a fourth option, Not Known, for a label that has worn or corroded past the point of reading.
No year range, truck list or chassis application is published against any of the three, and that is deliberate. Our catalogue records which modules we service, not which vehicle each one was originally fitted to, and we hold no certification document that would make it one. The rest of our International and Navistar module catalogue is organised by engine.
Injector driver or engine control: telling the two boxes apart
The injector driver module and the engine control module are two separate boxes on a 7.3L, and only one of them is repaired on this page. The IDM takes the injection command and supplies the high voltage that fires the injectors. The ECM is the computer issuing that command.
A crank/no-start or lack of throttle can accompany a loss of module power, but neither symptom by itself identifies a failed IDM or ECM. Use the Navistar procedure for your application and check the supply, grounds and wiring before shipping either unit.
Navistar's own service procedure powers the engine computer and the injector driver separately from each other. Either can fail while the other keeps working.
No single symptom settles it. If what you pulled is the engine computer rather than the injector driver, that is our Navistar 7.3L ECM repair page, which carries six part numbers and shares none of the three above.
Why these modules fail, and what the driver sees
The board work addresses failed components and solder joints inside the module. It does not repair the truck's harness, supply wiring or grounds, so those should be checked before the module is sent in.
What the driver reports is usually a no-start, a misfire under load, stalling, or power that comes and goes, often with injector circuit fault codes alongside.
None of it is proof the module is the problem. Supply voltage, grounds, relays and a damaged harness all produce the same complaints, and the fuses feeding clean power to the module are worth checking before anything comes off the truck. Where the codes point at a circuit rather than the module, start with the wiring.
The bench work your module gets
Our rebuild reaches past whatever died. We replace and resolder the failed parts, swap the components with a known failure record even where they still work, and reflow any solder joint that has gone cold.
The module then has to clear four checks before it leaves:
- It answers. Communication is confirmed first.
- It programs. The module has to accept a program.
- It keeps what it was given. Parameters have to survive storage, not load once and drop out.
- Voltage is in spec. Checked before it is packed.
We keep soldering technicians on staff because work at this level needs them, and diesel module rebuilding is the whole of the business at Diesel ECM Exchange.
Repair your own module, or buy a rebuilt one
Both routes cover the same three part numbers. Send your module in and you keep your own hardware: no part to select wrongly, no core to send back afterwards, and nothing held against a core up front, because the module on the bench came off your truck. The bench takes 3 to 5 business days from the day your module lands, and return delivery adds another 1 to 3. Neither window includes getting it to us, which is the leg you control: nothing counts until it arrives.
Buying a rebuilt Navistar 7.3L IDM instead sends a module out to you first, so the truck is not waiting on a round trip. That route costs more, it is programmed to your truck before it ships, and your old module goes back as the core inside 21 days to activate the free lifetime warranty. The warranty terms and the return policy cover the rest.
Buyers also weigh dealer modules, used units and repairs at home. For another module, check the exact part, test history, required programming and warranty with its seller. A repair at home also needs a way to verify the result; replacing a component alone does not establish that the module works.
We do not sell higher-voltage or performance-modified IDMs, and our warranty excludes performance work.
What is the difference between 1807313C1 and 1807313C2?
No published source states one, and we will not make up a difference nobody has documented. Both are listed as injector driver modules for the same engine, both are serviced here, and both carry the same repair price. Select the number stamped on your own module. If it matches neither, use the Not Known option.
Will a Ford 7.3L IDM fit my International, or will mine fit a Ford?
We make no interchange claim in either direction. Owner forums argue both sides and the sellers of these units contradict each other on it, which is not enough to put an answer on a page. What we can point to is how the catalogue is organised: these three part numbers are serviced here, the Ford injector driver module is sold by year and body style on its own page, and matching your truck and your number is what gets you to the right one.
The label on my module is unreadable. Can I still order a repair?
Yes. Choose the Not Known option on the part number selector and the order goes through without a number. It exists for exactly this, and on a repair your own module is the one coming to the bench, so there is no part to pick correctly in the first place.
Do I need to send anything with the module, or just the module itself?
Once the order is placed we contact you with a pre-paid shipping label. Follow the packing instructions supplied with it.
Can I buy a repair kit or the parts instead?
No. This page sells the repair service and the companion page sells rebuilt modules, so components and kits are not something we stock. Board-level work on an injector driver module means replacing failed components on the board and reflowing joints, and there is no bolt-in kit that corresponds to that.
Is there anywhere near me that does this?
Proximity is not something you need to solve. This is a mail-in repair and it works the same from anywhere in the United States, Alaska and Hawaii included. Your module travels to the bench and back, and we do not ship outside the US.
HOW DOES IT WORK?

Frequently asked questions
How does the free warranty work?
We are confident in the quality of our repairs, so we back every repair with a free lifetime warranty.
Will I be able to return my computer in the event it doesn't work?
Yes. If you are not satisfied with the repair within the 60 day period, you will be able to get a refund.
How quickly will you ship my computer?
Please allow 3-5 business days for us to repair your core once it has been received at our facility. Please allow 1-3 additional business days for delivery.
What if it can't be repaired?
It's rare, but it happens. If we can't save your unit, every dollar you paid is applied to a rebuilt replacement — you'd pay for that replacement either way, so there's no downside to trying the repair first. Worst case, you end up exactly where you started.
How can I pay?
We have a variety of ways you can pay. You can pay With Visa, Mastercard, American Express, and Discover, plus Google Pay and Apple Pay. We also accept Western Union, or you can send us a check or money order to the address below:
Diesel ECM Exchange
8208 Brownleigh Drive Suite 100
Raleigh, NC 27617
